The operation precautions of the fruit and vegetable beater are as follows:

The operation precautions of the fruit and vegetable beater are as follows:

1. Before starting the machine, first check whether the connection between the parts of the rotor is firm and reliable, whether the rotation of the motor is consistent with the label, and then add No. 20 mechanical oil to the bearings at both ends, turn the handwheel clockwise, and lock the front cover of the cylinder. Turn on; then add materials evenly without impact. Depending on the specific situation of the slag and slurry, the helix angle of the scraper and the gap between the scraper and the screen are adjusted appropriately to make the juice content of the slag meet the technological requirements. Stop: Turn the handwheel counterclockwise, after the motor stops rotating, pull off the main brake.

2. When the rotor does not stop rotating, do not open the front cover of the drum.

3. After each shift, it must be cleaned and maintained once to prevent the material from fermentation and deterioration in the machine and the lubricating part from losing oil. When cleaning, open the front cover of the cylinder and unscrew the tightening screw at one end of the spline, then the rotor parts can be easily taken out, and the screen can be taken out directly.